Trade Plateform

We Buy the Following Items

1. ZINC METAL/ ZINC INGOTS

SPECIAL HIGH GRADE 99.995% MIN.

HIGH GRADE 99.95% MIN.

ZINC METAL 99.50% MIN.

2. SECONDARY ZINC (CLASSIFICATION AS PER ISRI CODES):

SCRUB-HOT DIP GALVANIZERS SLAB ZINC DROSS (Batch Process)

Minimum Zinc content 92%.

Free of skimming and tramp iron.

Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.

Heavier pieces acceptable upon mutual agreement between buyer and seller.

SEAL-CONTINUOUS LINE GALVANIZING SLAB ZINC TOP DROSS

Minimum Zinc Content 90%.

Free of skimming.

Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.

Heavier pieces acceptable upon mutual agreement between buyer and seller.

SEAM-CONTINUOUS LINE GALVANIZING SLAB ZINC BOTTOM DROSS

Minimum Zinc Content 92%.

Free of skimmings.

Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.

Heavier pieces acceptable upon mutual agreement between buyer and seller.

SCORE-OLD SCRAP ZINC

Consists of clean dry scrap zinc, such as sheets, jar lids, clean unalloyed castings and anti-corrosion plates.

Borings and turnings are not acceptable.

Material must not be excessively corroded or oxidized.

All foreign attachments and extraneous materials are deductible.

SCREEN-NEW ZINC CLIPPINGS

Shall consist of any new pure zinc sheets or stampings free from corrosion.

To contain no foreign material or attachments.

SCRIBE-CRUSHED CLEAN SORTED FRAGMENTIZERS DIE CAST SCRAP, AS PRODUCED FROM AUTOMOBILE FRAGMENTIZERS

To be clean, free of dirt, oil, glass, rubber, and trash.

To contain a maximum of 5% unmeltables such as free iron, copper, aluminum and other metals.

SHELF-PRIME ZINC DIE CAST DROSS

Shall consist of metal skimmed from the top of pot of molten zinc die cast metal.

Must be unsweated, unfluxed, shiny, smooth, metallic and free from corrosion or oxidation.

Should be poured in molds or in small mounds weighing not over 75 pounds each.

Zinc shall be minimum of 85%.

BATTERY TRIMMINGS

Zinc content should be 99% minimum.

Should be in the form of bales/briquettes or packed loose in jumbo bags.

SCOPE-NEW PLATED ZINC DIE CAST SCRAP

Shall consist of new or unused clean, plated zinc based die castings, such as those of ZAMAC alloys, free from corrosion.

Could be in the form turnings or slabs.

ZINC ANODES

Shall consist of 99.9% Zinc with embedded steel bars.